

Faucet Repair in Ankeny, IA
Kitchen and Bathroom Faucet Service
A faucet should shut off cleanly, deliver steady water flow and keep water inside the sink. A persistent drip, loose handle or wet cabinet is a reason to have the fixture checked. 72 Degrees provides faucet repair for homeowners in Ankeny, Urbandale, Des Moines and surrounding central Iowa communities.
We examine the faucet and its connections, explain the source of the problem and help you compare a targeted repair with replacement. Call (515) 965-7272 to schedule faucet service. Mention any active leak when you call so we can understand the urgency.
Signs Your Faucet Needs Repair
-
Water drips from the spout after the handle is turned off.
-
Water collects around the base or beneath the sink.
-
The handle sticks, feels loose or no longer controls temperature reliably.
-
A pull-down hose leaks or the spray head does not switch patterns properly.
-
Flow is weak at one fixture while other fixtures work normally.
-
Corrosion or repeated leaks make the faucet difficult to use.
Where you see water is not always where the leak begins. A supply connection, faucet body, sprayer hose or drain fitting can wet the same cabinet. If the source is unclear, our leak detection and pipe repair service can help identify the problem before work is recommended.
What to Expect During Faucet Service
We start by asking when the problem occurs: with the water running, after shutoff or all the time. We inspect the fixture, accessible supply connections and surrounding area. That helps separate a worn faucet component from a drainage or supply-line issue.
Depending on the faucet design and condition, a repair may involve a cartridge, seal, aerator, hose or other compatible part. Parts are not interchangeable across every model. Having the brand, model number or original paperwork available can help identify the correct replacement.
Before work proceeds, we explain the recommended repair, parts availability and any reason replacement may be more practical. After approved work, we check operation and inspect the serviced connections for leaks. If another plumbing problem is visible, we explain it so you can decide on the next step.
Repair or Replace the Faucet?
A sound faucet with one worn component may be a good repair candidate. Replacement may make more sense when the body is damaged, corrosion is extensive, compatible parts are unavailable or repeated repairs have become inconvenient. The decision should reflect the fixture's condition and your plans for the room.
If you choose a new faucet, appearance is only part of the fit. Mounting holes, sink dimensions, spout reach, handle clearance and supply connections all matter. A high spout that looks right in a showroom may splash in a shallow basin. A pull-down model needs room for its hose beneath the sink.
Tell us if you are coordinating a sink change or kitchen update. We can discuss the plumbing connections and help you understand the scope before installation. Ask about compatibility before purchasing a customer-supplied fixture.
Low Flow, Mineral Buildup and Leaking Connections
Reduced flow at one faucet can come from a restricted aerator, cartridge or supply connection. Low flow
throughout the home may point to a broader issue. Comparing affected fixtures gives the plumber useful information; it does not establish the diagnosis by itself.
Mineral deposits can collect on faucet surfaces and inside small passages. Follow the manufacturer's cleaning guidance to protect the finish. Repeated buildup or problems at several fixtures may be worth discussing as part of a whole-home plumbing service visit.
If hot water is missing at several fixtures, mention that when scheduling. The concern may involve the supply or water heater, rather than the faucet alone.
Before Your Appointment
Clear stored items from beneath the sink and note where you first saw moisture. A photo of an intermittent leak can be useful. Avoid forcing a stuck handle or overtightening parts; that can damage the fixture without addressing the cause.
If water is actively leaking, stop using the fixture and turn off its accessible supply valves if you can do so safely. Do not force a seized valve. Call for help if you cannot stop the leak or water is spreading beyond the sink area. Keep away from electrical equipment exposed to water.
Local Faucet Repair for Ankeny Homes
Central Iowa homes include older fixtures, renovated kitchens and newer bathrooms with different faucet designs. We assess the equipment actually installed in your home. Our Urbandale location serves Ankeny, Des Moines and nearby communities, with faucet work connected to the broader plumbing support your household may need.
Faucet Repair FAQs
Do you repair faucets in Ankeny?
Yes. 72 Degrees serves Ankeny, Urbandale, Des Moines and surrounding central Iowa communities. Call with your address and a description of the faucet problem.
Does a dripping faucet always need replacement?
No. A compatible cartridge, seal or other component may resolve the drip when the faucet body is in good condition. We compare repair and replacement after inspecting the fixture.
Can you install a faucet I purchased?
Ask about the model before scheduling installation. We need to confirm that it fits the sink, mounting holes, clearances and plumbing connections, and explain any additional work required.
Why is only one faucet running slowly?
A restricted aerator, cartridge or supply connection may affect a single fixture. A plumber can check the cause. Mention whether both hot and cold water are affected and whether other fixtures have normal flow.
What should I do about water under the sink?
Stop using the fixture and close accessible supply valves if safe. Do not force a stuck valve. Call if the leak continues or its source is unclear, and stay away from electrical equipment exposed to water.
What information helps when scheduling?
Provide the faucet location, brand or model if known, symptoms and whether water is actively leaking. Let us know if you have already purchased a replacement fixture.
Schedule Faucet Repair
Get help with a dripping kitchen faucet, leaking bathroom fixture or replacement project. Call 72 Degrees at (515) 965-7272 to arrange service in Ankeny, Urbandale or Des Moines.






